Kia Sportage 2005-06

2.0L L4 - Auto 3

Print

Trouble Code: P0343



Camshaft Position Sensor High Input

Possible Causes:



CMP sensor signal circuit is shorted to VREF or system power
 
CMP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0350



Ignition Coil Primary/Secondary Circuit Malfunction

Possible Causes:



Ignition coil primary circuit open or shorted together
 
Ignition coil secondary components (coil or plug wires) arching
 
Ignition coil is damaged or has failed
 
PCM has failed
 

Trouble Code: P0351



Ignition Coil 'A' Circuit Malfunction

Possible Causes:



Ignition Coil 'A' primary circuit is open or shorted to ground
 
Ignition Coil 'A' power circuit is open (test power from I/P fuse)
 
Ignition Coil 'A' is damaged or has failed
 
PCM has failed
 

Trouble Code: P0352



Ignition Coil 'B' Circuit Malfunction

Possible Causes:



Ignition Coil 'B' primary circuit is open or shorted to ground
 
Ignition Coil 'B' power circuit is open (test power from I/P fuse)
 
Ignition Coil 'B' is damaged or has failed
 
PCM has failed
 

Trouble Code: P0353



Ignition Coil 'C' Circuit Malfunction

Possible Causes:



Ignition Coil 'C' primary circuit is open or shorted to ground
 
Ignition Coil 'C' power circuit is open (test power from I/P fuse)
 
Ignition Coil 'C' is damaged or has failed
 
PCM has failed
 

Trouble Code: P0354



Ignition Coil 'D' Circuit Malfunction

Possible Causes:



Ignition Coil 'D' primary circuit is open or shorted to ground
 
Ignition Coil 'D' power circuit is open (test power from I/P fuse)
 
Ignition Coil 'D' is damaged or has failed
 
PCM has failed
 

Trouble Code: P0355



Ignition Coil 'E' Circuit Malfunction

Possible Causes:



Ignition Coil 'E' primary circuit is open or shorted to ground
 
Ignition Coil 'E' power circuit is open (test power from I/P fuse)
 
Ignition Coil 'E' is damaged or has failed
 
PCM has failed
 

Trouble Code: P0356



Ignition Coil 'F' Circuit Malfunction

Possible Causes:



Ignition Coil 'F' primary circuit is open or shorted to ground
 
Ignition Coil 'F' power circuit is open (test power from I/P fuse)
 
Ignition Coil 'F' is damaged or has failed
 
PCM has failed
 

Trouble Code: P0420



Catalyst Efficiency Below Normal (Bank 1)

Possible Causes:



Air leaks at the exhaust manifold or in the exhaust pipes
 
Catalytic converter is damaged or has failed
 
Front HO2S or rear HO2S is contaminated with fuel or moisture
 
Front HO2S or rear HO2S is contaminated with fuel or moisture
 

Trouble Code: P0441



EVAP System Malfunction

Possible Causes:



Small hoses or cuts present in the EVAP vapor hoses/lines
 
EVAP canister purge solenoid is damaged or is stuck open
 
PCM has failed
 

Trouble Code: P0442



EVAP System Small Leak (0.040") Detected

Possible Causes:



Fuel filler cap damaged, cross-threaded or loosely installed
 
Small leaks or cuts present in the EVAP vapor hoses/lines
 
EVAP purge valve is damaged or has failed
 
PCM has failed
 

Trouble Code: P0444



EVAP Emission System- Purge Control Valve Circuit Open

Possible Causes:



Poor connection
 
Open or short to ground in harness
 
PCVS
 
PCM
 

Trouble Code: P0445



EVAP Emission System- Purge Control Valve Circuit Shorted

Possible Causes:



Poor connection
 
Short to battery in harness
 
PCVS
 
PCM
 

Trouble Code: P0447



EVAP Emission System- Vent Control Circuit Open

Possible Causes:



Poor connection
 
Open or short in power circuit
 
Open or short in control circuit
 
CCV
 
ECM/PCM
 

Trouble Code: P0448



EVAP Emission System- Vent Control Circuit Shorted

Possible Causes:



Poor connection
 
Short to battery in CCV circuit
 
CCV
 
ECM/PCM
 

Trouble Code: P0449



EVAP Emission System- Vent Valve/Solenoid Circuit

Possible Causes:



Poor connection
 
Open or short to ground in power circuit
 
CCV
 
ECM/PCM
 

Trouble Code: P0451



EVAP Pressure Sensor Performance

Possible Causes:



FTP sensor signal or ground circuit has high resistance
 
FTP sensor is damaged or out of calibration
 
EVAP canister close valve (CCV) is stuck closed
 
PCM has failed
 

Trouble Code: P0452



EVAP Pressure Sensor Circuit Low Input

Possible Causes:



FTP sensor signal circuit is shorted to ground
 
FTP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0453



EVAP Pressure Sensor Circuit High Input

Possible Causes:



FTP sensor signal circuit is open
 
FTP sensor ground circuit is open
 
FTP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0454



EVAP Emission System- Pressure Sensor Intermittent

Possible Causes:



Contact resistance in connectors
 
Faulty FTPS
 
Faulty ECM/PCM
 
Faulty FTPS
 

Trouble Code: P0455



EVAP System Large Leak Detected

Possible Causes:



Fuel filler cap damaged, cross-threaded or loosely installed
 
Small leaks or cuts present in the EVAP vapor hoses/lines
 
EVAP purge valve is damaged or has failed
 
PCM has failed
 

Trouble Code: P0456



EVAP System Very Small Leak (0.020") Detected

Possible Causes:



Fuel filler is damaged, cross-threaded, loose or missing
 
Fuel filler pipe is damaged, or a fuel vapor hose is leaking
 
Rollover valve or ORVR (valve) had failed allowing fuel in lines
 
Canister close valve clogged or stuck in open or closed position
 
Purge solenoid valve is damaged or installed improperly
 
FTP sensor is damaged or has failed
 
Leaks in the charcoal canister, or at the fuel tank seals
 

Trouble Code: P0461



Fuel Level Sensor -A- Circuit Range/Performance

Possible Causes:



Poor connection
 
Faulty fuel level sensor
 
Faulty PCM
 

Trouble Code: P0462



Fuel Level Sensor Input Low (Sticking)

Possible Causes:



Fuel level sending unit signal circuit shorted to VREF
 
Fuel level sending unit signal circuit shorted to system power
 
Fuel level sensing unit is damaged or the fuel tank is damaged
 
BCM or PCM has failed
 

Trouble Code: P0463



Fuel Level Sensor Input High (Sticking)

Possible Causes:



Fuel level sending unit signal circuit shorted to VREF
 
Fuel level sending unit signal circuit shorted to system power
 
Fuel level sensing unit is damaged or the fuel tank is damaged
 
BCM or PCM has failed
 

Trouble Code: P0464



Fuel Level Sensor -A- Circuit Intermittent

Possible Causes:



Contact resistance in connectors
 
Short to battery in fuel level (FLS) circuit
 
Faulty ECM
 

Trouble Code: P0501



Vehicle Speed Sensor Performance

Possible Causes:



VSS signal circuit is open or shorted to ground
 
VSS signal circuit is shorted to VREF or to system power (B+)
 
VSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0506



Idle Speed Lower Than Expected

Possible Causes:



High resistance between the main relay and IAC valve
 
High resistance between PCM and IAC valve control circuits
 
IAC valve is damaged or has failed
 
The throttle plate is carbon fouled (it may need to be cleaned)
 

Trouble Code: P0507



Idle Speed Higher Than Expected

Possible Causes:



High resistance between the main relay and IAC valve
 
High resistance between PCM and IAC valve control circuits
 
IAC valve is damaged or has failed
 
Intake air leak located below the throttle plate assembly
 

Trouble Code: P0560



Battery Backup Line Circuit Malfunction

Possible Causes:



Battery backup circuit to the PCM is open
 
Battery backup fuse to the PCM is open or missing
 
Battery backup circuit to the PCM has high resistance
 
PCM has failed
 

Trouble Code: P0561



System Voltage Unstable

Possible Causes:



Charging system problem (charging voltage interrupted)
 
Backup voltage circuit to the PCM open (intermittent fault)
 
PCM has failed
 

Trouble Code: P0562



System Voltage Low Input

Possible Causes:



Charging system problem (charging voltage too low)
 
Battery backup circuit to the PCM has high resistance
 
Backup voltage circuit to the PCM open (intermittent fault)
 
PCM has failed
 

Trouble Code: P0563



System Voltage High Input

Possible Causes:



Charging system problem (charging voltage too high)
 
Backup voltage circuit to the PCM open (intermittent fault)
 
PCM has failed
 

Trouble Code: P0600



CAN Communication Bus

Possible Causes:



Open or short in CAN line
 
Contact resistance in connectors
 
Faulty PCM
 

Trouble Code: P0601



PCM or TCM Internal Random Check Sum Error

Possible Causes:



Poor terminal contact at the ECM ISC Backup Voltage circuit
 
PCM or TCM has an internal problem or has failed
 

Trouble Code: P0604



PCM or TCM Internal Random Access Memory Error

Possible Causes:



Poor terminal contact at the ECM Backup Voltage circuit
 
PCM or TCM has an internal problem or has failed
 

Trouble Code: P0605



PCM (Internal Controller) ROM Error

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the PCM has failed and must be replaced to repair this problem.
 

Trouble Code: P0630



VIN Not Programmed Or Incompatible- ECM/PCMECM

Possible Causes:



PCM is new and has not yet been programmed
 
Faulty PCM
 

Trouble Code: P0650



Malfunction Indicator Lamp Circuit Malfunction

Possible Causes:



MIL control circuit open
 
MIL control circuit shorted to ground
 
MIL "bulb" is damaged or missing
 
PCM has failed (MIL control "driver" may be open or shorted)
 

Trouble Code: P0661



Intake Manifold Tuning Valve Control Circuit Low (Bank 1) Solenoid Type

Possible Causes:



Open in power supply harness
 
Short to ground in control harness
 
Contact resistance in connectors
 
Faulty valve
 

 
label.common.footer.alt.autozoneLogo