Kia Sportage 2005-06

Outside Mirrors

Print

Power Mirrors



Diagnosis & Testing
Mirror Switch
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the power mirror switch from the door panel.
  4.  
  5. Disconnect the electrical connector from the switch.
  6.  
  7. Check for continuity between the terminals in each switch position according to the table.
    1. If continuity is as specified, switch is okay.
    2.  
    3. If continuity is not as specified, replace the power mirror switch.

      Click image to see an enlarged view

      Fig. Power mirror switch terminal identification



      Click image to see an enlarged view

      Fig. Power mirror switch testing and terminal identification

    4.  

  8.  

Mirror Motor (Actuator)
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the quadrant inner cover.
  4.  
  5. Disconnect the eight pin electrical connector from the mirror assembly.
  6.  
  7. Check the mirror operation by connecting power and ground according to the table.
    WARNING
    To prevent damage to the motor, apply battery voltage only momentarily.

  8.  
  9. If operation is not as specified, replace the power mirror motor.

    Click image to see an enlarged view

    Fig. Power mirror motor testing and terminal identification

  10.  

Power Mirror Heater
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the quadrant inner cover.
  4.  
  5. Disconnect the eight pin electrical connector from the mirror assembly.
  6.  
  7. Check the mirror heater operation by connecting power and ground according to the table.
    WARNING
    To prevent damage to the actuator, apply battery voltage only momentarily.

  8.  
  9. If operation is not as specified, replace the power mirror motor.

    Click image to see an enlarged view

    Fig. Power mirror heater testing and terminal identification

  10.  

Removal & Installation
Motor


Click image to see an enlarged view

Fig. Exploded view of front door components

  1. Disconnect the negative battery cable.
  2.  
  3. Carefully pry and remove the quadrant inner cover.
    NOTE
    When prying with a with a metal pry tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.



    Click image to see an enlarged view

    Fig. Remove the quadrant inner cover as shown

  4.  
  5. Disconnect the electrical connector from the power mirror motor.
  6.  
  7. Remove the three nuts securing the motor to the door panel and remove the power mirror motor.

    Click image to see an enlarged view

    Fig. Power mirror motor mounting

  8.  

To install:

  1. Install the power mirror motor to the door panel and secure with the three bolts.
  2.  
  3. Connect the electrical connector to the power mirror motor.
  4.  
  5. Install the quadrant inner cover.
  6.  
  7. Connect the negative battery cable.
  8.  

Switch

The power mirror switch is incorporated into the power window switch module.

  1. Disconnect the negative battery terminal.
  2.  
  3. Remove the power window switch module from the door panel by pressing fixing clip part (B) with scraper (A).
  4.  
  5. Disconnect the electrical connector from the switch.
  6.  
  7. Install in the reverse order of removal.

    Click image to see an enlarged view

    Fig. Removing the power window module from the door panel trim

  8.  

 
label.common.footer.alt.autozoneLogo