Kia Sportage 2005-06

Multi-Function (Combination) Switches

Print

Removal & Installation




CAUTION
Before servicing, or working around, the SRS system, properly disarm the system.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Position the front wheels in the straight ahead position.
  4.  
  5. Disconnect the negative battery cable.
  6.  
  7. Remove the air bag module.
  8.  
  9. Following proper procedures, remove the steering wheel.
  10.  
  11. Remove the steering column upper and lower shrouds.
  12.  
  13. Remove the two retaining screws and remove the lower crash pad.
  14.  
  15. Disconnect the multifunction switch electrical connectors.
  16.  
  17. After removing three bolts (A) shown, remove the multifunction switch assembly (B).
  18.  

To install:

  1. Position the multifunction switch on the column shaft and secure with the three bolts (A).
  2.  
  3. Connect the multifunction switch electrical connectors.
  4.  
  5. Install the lower crash pad (B) and tighten the mounting bolts.
  6.  
  7. Install the steering column upper (A) and lower shrouds (B).
  8.  
  9. Install the steering wheel.
  10.  
  11. Install the air bag module.
  12.  
  13. Connect the negative battery cable.

    Click image to see an enlarged view

    Fig. Lower crash panel mounting locations



    Click image to see an enlarged view

    Fig. Multifunction Switch mounting locations

  14.  

 
label.common.footer.alt.autozoneLogo