Kia Sportage 2005-06

Brake Caliper

Print

Removal & Installation





Click image to see an enlarged view

Fig. Rear disc brake components

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise the rear of the vehicle, and make sure it is securely supported. Remove the wheels.
  4.  
  5. Remove brake hose-to-caliper bolt, plug the line and discard the washers.
  6.  
  7. Remove the caliper pin bolts and remove the caliper from the anchor plate.
  8.  
  9. Installation is the reverse of removal. Torque the caliper pin bolts to 16-23 ft. lbs. (22-31 Nm). Torque the brake hose bolt to 18-22 ft. lbs. (24-29 Nm). Use new washers. Bleed the brakes.
  10.  

 
label.common.footer.alt.autozoneLogo