LS 2006

Oil Temperature Sensor



The EOT sensor is a thermistor device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as the temperature increases and the resistance increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signals to the PCM corresponding to temperature.

Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow.

Voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.

The EOT sensor measures the temperature of the engine oil. The sensor is typically threaded into the engine oil lubrication system. The PCM can use the EOT sensor input to determine the following:

On variable cam timing (VCT) applications the EOT input is used to adjust the VCT control gains and logic for camshaft timing.
The PCM can use EOT sensor input in conjunction with other PCM inputs to determine oil degradation.
The PCM can use EOT sensor input to initiate a soft engine shutdown. To prevent engine damage from occurring as a result of high oil temperatures, the PCM has the ability to initiate a soft engine shutdown. Whenever engine RPM exceeds a calibrated level for a certain period of time, the PCM will begin reducing power by disabling engine cylinders.


  1. Before servicing the vehicle, refer to the Precautions section.
  3. Measure the oil temperature.
  5. With the oil temperature sensor disconnected, measure the resistance of the sensor and compare to the illustration.

    Click image to see an enlarged view

    Fig. Oil Temperature Sensor specifications