LS 2006

Brake Calipers


Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions section.
  3. Remove or disconnect the following:

    Front wheel
    Brake fluid hose
    Caliper mounting bolts
    Brake caliper

    Click image to see an enlarged view

    Fig. Exploded view of the front disc brake components



To install:

  1. Install or connect the following:

    Brake caliper. Tighten the mounting bolts to 26 ft. lbs. (35 Nm).
    Brake fluid hose. Use new copper washers and tighten the bolt to 35 ft. lbs. (47 Nm).
    Front wheel

  3. Bleed the brake system.
  5. Before attempting to move the vehicle, pump the brake pedal to seat the pads against the rotors. Make sure the vehicle has a firm brake pedal. Check the level of the brake fluid and add DOT 3 or 4 brake fluid if necessary.