LaCrosse 2006-2007

Removal & Installation

Print

  1. Recover the refrigerant.
  2.  
  3. Remove the radiator.
  4.  
  5. Remove the A/C line coupling from the condenser tube to the receiver dehydrator tube.
  6.  
  7. Remove the A/C compressor line nut from the condenser and position the A/C compressor line aside.
  8.  
  9. Remove the condenser from the vehicle.
  10.  
  11. Remove and discard the O-ring seals and seal washer.
  12.  

To install:

  1. If replacing the condenser, add refrigerant oil to the condenser.
  2.  
  3. Install the condenser to the vehicle.
  4.  
  5. Install a new seal washer onto the A/C compressor hose.
  6.  
  7. Install new O-ring seals onto the receiver dehydrator tube.
  8.  
  9. Install the receiver dehydrator tube to the condenser.
  10.  
  11. Install the A/C line coupling to the receiver dehydrator tube and the condenser tube.
  12.  
  13. Install the A/C compressor hose to the condenser.
  14.  
  15. Install the A/C compressor hose block fitting nut to the condenser.
  16.  
  17. Install the radiator.
  18.  
  19. Evacuate and recharge the A/C system.
  20.  
  21. Leak test the fittings of the components.
  22.  

 
label.common.footer.alt.autozoneLogo