LaCrosse 2006-2007

Removal & Installation

Print

  1. Remove the instrument panel lower trim plate.
  2.  
  3. Remove the HVAC control module mounting screws.
  4.  
  5. Pull the HVAC control module rearward from the instrument panel.
  6.  
  7. Disconnect the electrical connectors form the HVAC control module.
  8.  
  9. Remove the HVAC control module.
  10.  

To install:


NOTE
The key should be in the off position when connecting the electrical connectors to ensure proper calibration.

  1. Connect the electrical connectors to the HVAC control module.
  2.  
  3. Install the HVAC control module.
  4.  
  5. Install the HVAC control module mounting screws.
  6.  
  7. Install the instrument panel lower trim plate.
    NOTE
    Do not adjust any controls on the HVAC control module while the HVAC control module is calibrating. If interrupted improper HVAC performance will result.

  8.  

 
label.common.footer.alt.autozoneLogo