LaCrosse 2006-2007

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the tire and wheel assembly.
  6.  
  7. Remove the left and right side stabilizer shaft insulator clamp bolts.
  8.  
  9. Remove the left and right side stabilizer shaft insulator clamp.

    Click image to see an enlarged view

    Fig. Stabilizer bar mounting bolts

  10.  
  11. Remove the left and right side stabilizer shaft insulators from the stabilizer shaft.

    Click image to see an enlarged view

    Fig. Stabilizer shaft link bolt and nut

  12.  
  13. Remove the stabilizer shaft link (control link) bolt and nut.
  14.  
  15. Remove the control link from the vehicle.
  16.  

To install:

  1. Install the control link into the vehicle.
  2.  
  3. Install the control link bolt and nut. Tighten the control link nut to 17 ft. lbs. (23 Nm).
  4.  
  5. Install the left and right side stabilizer shaft insulators to the stabilizer shaft.
  6.  
  7. Install the left and right side stabilizer shaft insulator clamps.
  8.  
  9. Install the left and right side stabilizer shaft insulator clamp bolts. Tighten the bolts to 31 ft. lbs. (42 Nm).
  10.  
  11. Install the tire and wheel assembly.
  12.  
  13. Lower the vehicle.
  14.  

 
label.common.footer.alt.autozoneLogo