LaCrosse 2006-2007

Control Arms & Links

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.

    Click image to see an enlarged view

    Fig. Remove the nut from the control link and the stabilizer shaft

  4.  
  5. Remove the nut from the control link (1) and the stabilizer shaft (2).

    Click image to see an enlarged view

    Fig. Remove the nut from the control link and the strut

  6.  
  7. Remove the nut (1) from the control link (2) and the strut.
  8.  
  9. Remove the control link (2) from the vehicle.
  10.  

To install:

  1. Install the control link to the vehicle.
  2.  
  3. Connect the control link to the stabilizer shaft.
  4.  
  5. Install the nut to the control link and the stabilizer shaft. Tighten the nut to 37 ft. lbs. (50 Nm).
  6.  
  7. Connect the control link to the strut.
  8.  
  9. Install the nut to the control link and the strut. Tighten the nut to 38 ft. lbs. (52 Nm).
  10.  
  11. Lower the vehicle.
  12.  

 
label.common.footer.alt.autozoneLogo