Land Rover 2000-05

Blower Motor

Print

Removal & Installation



  1. Remove rear lower trim casing.
  2.  
  3. Remove 5 bolts securing third row seat support bracket and remove bracket.
  4.  
  5. Disconnect blower motor multiplug and release hose from casing.
  6.  
  7. Remove screws securing blower motor and remove motor from casing.

    Click image to see an enlarged view

    Fig. Detach the blower motor connector (3), then unfasten the screws (4) and remove the blower motor (4)

  8.  

To install:

  1. Position the blower motor, align to casing and secure with screws.
  2.  
  3. Connect the motor connector and secure hose to casing.
  4.  
  5. Position seat support bracket, fit bolts and tighten to 18 ft. lbs. (24 Nm)
  6.  
  7. Install the rear lower trim casing.
  8.  

 
label.common.footer.alt.autozoneLogo