Land Rover 2000-05

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Unfasten the 3 screws securing the fan motor assembly to heater casing.
  4.  
  5. Release the fan assembly from heater and disconnect the multiplug connector.
  6.  
  7. Remove the fan assembly.

    Click image to see an enlarged view

    Fig. Unfasten the screws (1), then detach the connector (2) and remove the blower motor (2)

  8.  

To install:

  1. Position the fan assembly to heater and connect the multiplug.
  2.  
  3. Install the fan assembly to the heater casing and secure with screws.
  4.  
  5. Connect the negative battery cable.
  6.  

  1. Disconnect the negative battery cable.
  2.  
  3. Remove 4 studs securing toe board and remove toe board.

    Click image to see an enlarged view

    Fig. Remove the studs (1), then remove the toe board

  4.  
  5. Remove 4 screws securing glove box, release catch and remove glove box.

    Click image to see an enlarged view

    Fig. Unfasten the 4 glove box screws (2), then release the catch and remove the glove box

  6.  
  7. Remove screw securing harness to blower motor and release harness.

    Click image to see an enlarged view

    Fig. Remove the harness screw (3), electrical connector (4) and blower motor mounting screws (5)

  8.  
  9. Disconnect multiplug from blower motor.
  10.  
  11. Remove 3 screws securing blower motor to casing and remove blower motor.
  12.  

To install:

  1. Position the blower motor to the casing and secure with screws.
  2.  
  3. Connect the connector to blower motor.
  4.  
  5. Position harness and secure clip with screw.
  6.  
  7. Fit glove box, align hinges and tighten screws.
  8.  
  9. Position toe board and secure with studs.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo