Lexus Car ES, IS, LS 1998-06

Turn Signal (Combination) Switch

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Place the front wheels facing straight ahead.
  4.  
  5. Disconnect the negative battery cable. Wait at least 90 seconds before performing any work.
  6.  
  7. Remove the steering wheel assembly.
  8.  
  9. Remove all necessary steering column covers and lower instrument panel covers for access.
  10.  
  11. Remove the turn signal (combination) switch assembly as follows:


    1. Disconnect the connectors.
    2.  
    3. Disconnect the airbag connector.
    4.  
    5. Remove the mounting screws and turn signal switch assy.
    6.  

  12.  

To install:

  1. Install the turn signal (combination) switch assembly as follows:


    1. Install the turn signal switch assy with the mounting screws.
    2.  
    3. Connect the airbag connector.
    4.  
    5. Connect the wiring connectors.
    6.  

  2.  
  3. Inspecft the spiral cable sub-assembly.
  4.  
  5. Install the steering column covers and lower instrument panel covers removed for access.
  6.  
  7. Place the front wheels facing straight ahead.
  8.  
  9. Install the steering wheel assembly.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo