Lexus GS, SC 1998-06

Spiral Cable

Print

Spiral Cable Centering



  1. Center the spiral cable as follows:


    1. Check that the ignition switch is OFF.
    2.  
    3. Check that the battery negative terminal is disconnected. Do not start the operation for 90 seconds after removing the terminal.
    4.  
    5. Turn the cable counterclockwise by hand until it becomes harder to turn.
    6.  
    7. Then rotate the cable clockwise about 2.5 turns to align the marks. The cable will rotate about 2.5 turns to both left and right of the center.
    8.  

  2.  

 
label.common.footer.alt.autozoneLogo