Lexus GS, SC 1998-06

Differential Case Oil Seal

Print

Removal & Installation



With AWD
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the halfshaft assemblies.

    Click image to see an enlarged view

    Fig. Using SST 09308-00010 to remove the oil seals from the differential carrier.-AWD

  4.  
  5. Using SST 09308-00010, remove the 2 (left and right side) oil seals from the differential carrier.
  6.  

To install:

Click image to see an enlarged view

Fig. Installation depth of the 2 new oil seals.-AWD

  1. Using SST 09613-22011, 09950-60010 (09951-00560) and a hammer, install 2 new oil seals to the following installation depth:

    Left Side: 0.039-0.079 inch (1-2mm)
     
    Right Side: 0.295-0.335 inch (7.5-8.5mm)
     

  2.  
  3. Apply MP grease to the oil seal lips.
  4.  
  5. Install the halfshaft assemblies.
  6.  

 
label.common.footer.alt.autozoneLogo