Lexus GS, SC 1998-06

Ignition Lock Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Place the front wheels facing straight ahead.
  4.  
  5. Disconnect the negative battery cable. Wait at least 90 seconds before performing any work.
  6.  
  7. Remove the steering wheel assembly.
  8.  
  9. Remove all necessary steering column covers and lower instrument panel covers for access.
  10.  
  11. Remove the turn signal (combination) switch assembly.
  12.  
  13. Place the ignition lock cylinder assembly at the ACC position.
  14.  
  15. Push down the stop pin with a screwdriver, and pull out the ignition lock cylinder assembly.
  16.  

To install:

  1. Make sure the ignition lock cylinder assembly is at the ACC position.
  2.  
  3. Install the ignition lock cylinder assembly.
  4.  
  5. Install the turn signal (combination) switch assembly.
  6.  
  7. Inspect the spiral cable sub-assembly.
  8.  
  9. Install the steering column covers and lower instrument panel covers removed for access.
  10.  
  11. Place the front wheels facing straight ahead.
  12.  
  13. Install the steering wheel assembly.
  14.  
  15. Connect the negative battery cable.
  16.  

 
label.common.footer.alt.autozoneLogo