Lexus LX470 2002-06

Blower Motor

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the rear cooling unit from the vehicle.
  4.  
  5. Remove the 2 screws and the A/C amplifier.
  6.  
  7. Disconnect the connector.
  8.  
  9. Remove the 2 screws and the power transistor.
  10.  
  11. Remove the wire harness.
  12.  
  13. Remove the 11 screws, 3 holding springs and separate the cooling unit cases.
  14.  
  15. Disconnect the connector.
  16.  
  17. Remove the blower case.
  18.  
  19. Remove the 3 screws and the blower motor.
  20.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo