Lexus LX470 2002-06

Rear Main Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the transmission and flywheel from the vehicle.
  4.  
  5. Cut off the rubber lip portion of the seal with a sharp knife.
  6.  
  7. Pry out the oil seal.
  8.  

To install:

  1. Install the rear main seal so that it is flush with the seal retainer housing.
  2.  
  3. Install or connect the following:

    Flywheel/driveplate. Tighten the bolts to 35 ft. lbs. (48 Nm) plus a 90 degree turn.
     
    Transmission
     

  4.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the transmission and flywheel from the vehicle.
  4.  
  5. Cut off the rubber lip portion of the seal with a sharp knife.
  6.  
  7. Pry out the oil seal.
  8.  

To install:

  1. Install the rear main seal so that it is flush with the seal retainer housing.
  2.  
  3. Install or connect the following:

    Flywheel/driveplate. Tighten the bolts to 35 ft. lbs. (48 Nm) plus a 90 degree turn.
     
    Transmission
     

  4.  

 
label.common.footer.alt.autozoneLogo