Lexus LX470 2002-06

Starter

Imprimir

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Relieve the fuel system pressure.
  6.  
  7. Remove or disconnect the following:

    Negative battery cable
     
    Engine appearance cover
     
    Air intake tube
     
    Intake manifold
     
    Starter motor mounting bolts
     
    Starter wiring connectors
     
    Starter motor
     

  8.  

To install:

  1. Install or connect the following:

    Starter motor
     
    Starter wiring connectors. Tighten the cable nut to 86 inch lbs. (10 Nm).
     
    Starter motor mounting bolts. Tighten the bolts to 29 ft. lbs. (39 Nm).
     
    Intake manifold
     
    Air intake tube
     
    Engine appearance cover
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Relieve the fuel system pressure.
  6.  
  7. Remove or disconnect the following:

    Negative battery cable
     
    Engine appearance cover
     
    Air intake tube
     
    Intake manifold
     
    Starter motor mounting bolts
     
    Starter wiring connectors
     
    Starter motor
     

  8.  

To install:

  1. Install or connect the following:

    Starter motor
     
    Starter wiring connectors. Tighten the cable nut to 86 inch lbs. (10 Nm).
     
    Starter motor mounting bolts. Tighten the bolts to 29 ft. lbs. (39 Nm).
     
    Intake manifold
     
    Air intake tube
     
    Engine appearance cover
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.