Lexus RX400h, Hybrid 3 2006
Lower Control Arms
Removal & Installation
Remove the engine/transaxle assembly.
Remove the transverse engine mounting insulator.
Remove the 3 bolts securing the arm to the engine support member.
Remove the front lower arm bush stopper.
Remove the ball joint-to-arm bolts.
Installation is the reverse of removal. Observe the following torques:
2 short arm-to-support bolts: 148 ft. lbs. (200 Nm)
1 long arm-to-support bolt: 152 ft. lbs. (206 Nm)
Ball joint-to-arm: 94 ft. lbs. (127 Nm)
Transverse engine mounting insulator: 64 ft. lbs. (87 Nm)