Liberty, Wrangler 2006-2007

Timing Belt Rear Cover

Print

Removal & Installation



2.4L Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the crankshaft vibration damper.
  4.  
  5. Remove the timing belt front cover
  6.  
  7. Remove timing belt and sprockets.
  8.  
  9. Remove the bolts securing the rear cover from the engine.
  10.  

To install:

  1. Install the timing belt rear cover to the engine. Tighten the bolts to 105 inch lbs. (12 Nm).
  2.  
  3. The remaining installation is the reverse of removal.
  4.  

2.8L Diesel Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the crankshaft vibration damper.
  4.  
  5. Remove the timing belt front cover
  6.  
  7. Remove timing belt and sprockets.
  8.  
  9. Remove the bolts securing the rear cover from the engine.
  10.  

To install:

  1. Install the timing belt rear cover to the engine. Tighten the 10mm bolts to 30 ft. lbs. (41 Nm) and the 8mm bolts to 96 inch lbs. (11 Nm).
  2.  
  3. The remaining installation is the reverse of removal.
  4.  

 
label.common.footer.alt.autozoneLogo