Liberty, Wrangler 2006-2007

Starter Solenoid

Print


NOTE
The starter solenoid is serviced with the starter motor.

The starter relay is located in the Power Distribution Center (PDC) in the engine compartment. Refer to the PDC cover for relay identification and location. The starter relay cannot be repaired or adjusted; if faulty or damaged, it must be replaced.

  1. Disconnect negative battery cable.
  2.  
  3. Remove cover from Power Distribution Center (PDC) for relay identification and location.
  4.  
  5. Remove starter relay from PDC.
  6.  
  7. Installation is the reverse of removal.
  8.  

 
label.common.footer.alt.autozoneLogo