MINI 2002-05

Hydraulic System

Print

Hydraulic System Bleeding



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the battery compartment.
  4.  
  5. Remove the dust cap from the bleeder screw.
  6.  
  7. Attach Special Service Tool 21 5 030 to the clutch slave cylinder.
  8.  
  9. Open the bleed screw.
    NOTE
    Operating pressure must not exceed 1 bar (14.5 psi.). Refer to equipment operating instructions.

  10.  
  11. Close bleed screw when no further bubbles appear.
  12.  
  13. Fill the brake fluid to the correct level.
  14.  

 
label.common.footer.alt.autozoneLogo