MINI 2002-05

Ignition Coils

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Disconnect the ignition coil wiring harness.
  6.  
  7. Remove the spark plug wires.
  8.  
  9. Remove the three screws and the ignition coil.
  10.  

To install:

Click image to see an enlarged view

Fig. Screw (1) and spacer tube (2) are only available as a single set Check insulating rings (3), replace if necessary

  1. Install the ignition coil and tighten the three screws to 12 Nm (106 inch lbs.).
  2.  
  3. Install the spark plug wires.
  4.  
  5. Connect the ignition coil wiring harness.
  6.  

 
label.common.footer.alt.autozoneLogo