MINI 2002-05

Throttle Body

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the air filter housing.
  6.  
  7. Disconnect the tank venting valve line.
  8.  
  9. Disconnect the wiring harness.
  10.  
  11. Remove the throttle valve assembly.
  12.  

To install:


NOTE
If the throttle valve assembly is being replaced, the adaptive values in the PCM must be reset.

  1. Install the throttle valve assembly.
  2.  
  3. Connect the wiring harness.
  4.  
  5. Connect the tank venting valve line.
  6.  
  7. Install the air filter housing.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo