Malibu 2001-2005

Blower Motor Resistor

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the blower motor resistor wire harness connector.
  4.  
  5. Remove the blower motor resistor screws.
  6.  
  7. Remove the blower motor resistor.

    Click image to see an enlarged view

    Fig. Blower motor resistor removal

  8.  

To install:

  1. Install the blower motor resistor.
  2.  
  3. Tighten the blower motor resistor screws to 13 inch. lbs. (1.5 Nm).
  4.  
  5. Install the blower motor resistor wire harness connector.
  6.  
  7. Install the right closeout panel.
  8.  

 
label.common.footer.alt.autozoneLogo