Malibu 2001-2005

Mode Door Actuator

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fuse labeled HVAC CTRL (BATT).
  4.  
  5. Completely open Instrument Panel (I/P) compartment door (Glove box) by pressing both tabs that support the stop bumpers.

    Click image to see an enlarged view

    Fig. Instrument Panel (I/P) compartment door

  6.  
  7. Remove the mode actuator screws
  8.  
  9. Remove the mode actuator

    Click image to see an enlarged view

    Fig. Mode actuator removal

  10.  

To install:

  1. Install the mode actuator.
  2.  
  3. Install the mode actuator screws and tighten to 13 inch. lbs. (1.5 Nm).
  4.  
  5. Install the mode actuator wire harness connector.
  6.  
  7. Close I/P compartment door (Glove box).
  8.  
  9. Install the fuse labeled HVAC CTRL (BATT).
  10.  

 
label.common.footer.alt.autozoneLogo