Malibu, Malibu MAXX 2006-2008

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the Instrument Panel (I/P) left trim panels.
  4.  
  5. Remove the I/P right trim panels.
  6.  
  7. Remove the I/P compartment (Glove box).
  8.  
  9. Remove the knee bolster.
  10.  
  11. Remove the I/P center trim bezel.
  12.  
  13. Remove the hazard switch.

    Click image to see an enlarged view

    Fig. Instrument Panel (I/P) center trim bezel

  14.  
  15. Remove the HVAC control module screws.
  16.  
  17. Remove the HVAC control module.
  18.  
  19. Remove the HVAC control module wire harness connectors.

    Click image to see an enlarged view

    Fig. HVAC control module

  20.  

To install:

  1. Install the HVAC control module wire harness connectors.
  2.  
  3. Install the HVAC control module.
  4.  
  5. Tighten the HVAC control module screws to 22 inch. lbs. (2.5 Nm).
  6.  
  7. Install the hazard switch.
  8.  
  9. Install the I/P center trim bezel.
  10.  
  11. Install the knee bolster and tighten the mounting screws to 22 inch. lbs. (2.5 Nm).
  12.  
  13. Install the I/P compartment (Glove box) and tighten the mounting screws to 22 inch. lbs. (2.5 Nm).
  14.  
  15. Install the I/P right and left trim panels.
  16.  

 
label.common.footer.alt.autozoneLogo