Malibu, Malibu MAXX 2006-2008

Control Links

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the front wheel.
  6.  
  7. Disconnect the stabilizer control link from the stabilizer shaft.
  8.  
  9. Disconnect the stabilizer control link from the strut assembly and remove from the vehicle.

    Click image to see an enlarged view

    Fig. Control link lower view



    Click image to see an enlarged view

    Fig. Control link upper view

  10.  

To install:

  1. Connect the stabilizer control link to the strut assembly.
  2.  
  3. Connect the stabilizer control link to the stabilizer shaft.
  4.  
  5. Tighten stabilizer control link nuts to 48 ft. lbs. (65 Nm).
  6.  
  7. Install the front wheel.
  8.  
  9. Lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo