Malibu, Malibu MAXX 2006-2008

Toe Link

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the tire and wheel.
  6.  
  7. Remove the toe link to steering knuckle bolt.
  8.  
  9. Remove the toe link to support assembly bolt and nut.
  10.  
  11. Remove the toe link from the rear support assembly and vehicle.

    Click image to see an enlarged view

    Fig. Rear toe link and bolts

  12.  

To install:

  1. Install the toe link into the support assembly
  2.  
  3. Loosely install the toe assembly bolt and nut.
  4.  
  5. Install the toe link to steering knuckle and tighten as follows:

    Tighten the bolt and nut to 81 ft. lbs. (110 Nm) plus 70°.
     
    Tighten the toe assembly bolt and nut to 81 ft. lbs. (110 Nm) plus 70°.
     

  6.  
  7. Install the tire and wheel.
  8.  
  9. Lower the vehicle.
  10.  
  11. Adjust the rear toe.
  12.  

 
label.common.footer.alt.autozoneLogo