Maxima 2007

Camshaft Position Sensor

Print

Operation



Specific to:

Nissan 350Z 2007-2008

Nissan Maxima 2007-2008

The Camshaft Position (CMP) sensor consists of a permanent magnet and Hall IC. When engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. Due to the changing magnetic field, the voltage from the sensor changes. ECM receives the signals.

Removal & Installation



Specific to:

Nissan 350Z 2007-2008

Nissan Maxima 2007-2008

  1. Loosen the fixing bolt of the sensor.
  2.  
  3. Disconnect Camshaft Position (CMP) sensor harness connector.
  4.  
  5. Remove the sensor.
  6.  

To install:

  1. Installation is reverse of removal.
  2.  

Testing



Specific to:

Nissan 350Z 2007-2008

Nissan Maxima 2007-2008

  1. Remove Camshaft Position (CMP) sensor.
  2.  
  3. Visually check the sensor for chipping.
  4.  
  5. Check resistance:

    Terminal: 1 (+) to 2 (-): except 0 resistance
     
    Terminal: 1 (+) to 3 (-): except 0 resistance
     
    Terminal: 2 (+) to 3 (-): except 0 resistance

    Click image to see an enlarged view

    Fig. Sensor pinout

     

  6.  

 
label.common.footer.alt.autozoneLogo