Maxima 2007

Throttle Position Sensor

Print

Operation



Specific to:

Nissan 350Z 2007-2008

Nissan Maxima 2007-2008

Electric Throttle Control actuator consists of Throttle Control motor, Throttle Position (TPS) sensor, etc. The TPS responds to the throttle valve movement.

Removal & Installation



Specific to:

Nissan 350Z 2007-2008

Nissan Maxima 2007-2008

  1. Remove the Electrical connector.
  2.  
  3. Remove the Electric Throttle Control actuator bolts in the order as shown and remove the Electric Throttle Control actuator.
  4.  

To install:

  1. Installation is reverse of removal.
  2.  

Testing



Specific to:

Nissan 350Z 2007-2008

Nissan Maxima 2007-2008

  1. Reconnect all harness connectors disconnected.
  2.  
  3. Turn ignition switch ON.
  4.  
  5. Set selector lever to D position.
  6.  
  7. Check voltage between ECM terminals 50 (TPS sensor 1 signal), 69 (TPS sensor 2 signal) and ground under the following conditions:

    Terminal 50: fully released to More than 0.36V
     
    Terminal 50: fully depressed to Less than 4.75V
     
    Terminal 69: fully released to Less than 4.75V
     
    Terminal 69: fully depressed to More than 0.36V
     

  8.  

 
label.common.footer.alt.autozoneLogo