Maxima 2007

Removal & Installation

Print

  1. Disconnect battery negative terminal.
  2.  
  3. Remove the CVT finisher.
  4.  
  5. Pull up on the rear portion of cluster lid C, once the 4 bottom clips are disengaged, pull rearward to release molded clips at the top of cluster lid C.
  6.  
  7. Disconnect the electrical connectors.
  8.  
  9. Remove front air control, storage bin, hazard switch, aux in jack, and power outlet.
  10.  
  11. Remove cluster lid D screws using power tool.
  12.  
  13. Pull cluster lid D toward rear of vehicle to release clips.
  14.  
  15. Disconnect the electrical connectors.
  16.  
  17. Remove the audio switch (if equipped) and the center vent ducts.
  18.  

To install:

  1. Installation is in the reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo