Maxima 2007

Ignition Lock Cylinder

Print

Removal & Installation



  1. Remove the bolt from the upper joint, then remove the upper joint from the steering column assembly.
  2.  
  3. Remove the ignition switch tamper resistant self-shear screws, using a drill.
  4.  
  5. Disconnect key interlock cable then remove the ignition switch from the steering column.
  6.  
  7. Remove spring, tilt lever, brackets and bushings as necessary.
  8.  

To install:

  1. Assembly is in the reverse order of disassembly.
  2.  
  3. Install new tamper resistant self-shear screws.
  4.  

 
label.common.footer.alt.autozoneLogo