Maxima 2007

Window Systems

Print

Power Windows



Diagnosis & Testing


Click image to see an enlarged view

Fig. Window and lock switch harness pinout



Click image to see an enlarged view

Fig. LF window terminal reference value 1



Click image to see an enlarged view

Fig. LF window terminal reference value 2



Click image to see an enlarged view

Fig. RF window terminal reference value 1



Click image to see an enlarged view

Fig. RF window terminal reference value 2



Click image to see an enlarged view

Fig. Rear window terminal reference value 1



Click image to see an enlarged view

Fig. Rear window terminal reference value 2

Removal & Installation
Motor & Regulator

Specific to:

Nissan Maxima 2007-2008

  1. Remove the front door speaker.
  2.  
  3. Remove the inside seal.
  4.  
  5. Remove 2 hole covers over glass bolts.
  6.  
  7. Remove the glass bolts.
  8.  
  9. Temporarily reconnect the power window main switch and raise/lower the door window until the glass bolts can be seen.
  10.  
  11. While holding the door window, raise it at the rear end to pull the glass out of the sash toward the outside of the door.

    Click image to see an enlarged view

    Fig. Front door window regulator

  12.  

To install:

  1. Installation is in the reverse order of removal.
  2.  

Switch

Specific to:

Nissan Maxima 2007-2008

  1. Disconnect the negative and positive battery cables, then wait at least 3 minutes.
  2.  
  3. Remove cover from inside door handle assembly escutcheon, then remove screw.
  4.  
  5. Remove power window and door lock/unlock switch and disconnect harnesses.
  6.  

To install:

  1. Installation is in the reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo