Maxima 2007

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Rear wheels
     
    Parking brake cable bracket bolt
     
    Pin bolts and lift off the caliper body
     
    Pad springs by pulling them out
     
    Pads and shims
     

  4.  

To install:

  1. Turn the piston clockwise back into the caliper body. Take care not to damage the piston boot.
  2.  
  3. Coat the pad contact area on the mounting support with a silicone based grease.
  4.  
  5. Install or connect the following:

    Pads, shims, and the pad springs
     
    Caliper body into position and torque the caliper pin bolts to 32 ft. lbs. (48 Nm)
     
    Wheels
     

  6.  
  7. Check the master cylinder and add fluid if necessary.
  8.  

 
label.common.footer.alt.autozoneLogo