Maxima 2007

Front Lower Link

Print

Removal & Installation



  1. Remove the front lower link nut and bolt from the knuckle side and the adjusting bolt and nut from the suspension member side using power tools.
  2.  
  3. Do not reuse the adjusting nut, use a new adjusting nut for installation.
  4.  
  5. Remove the front lower link.
  6.  

To install:

  1. Installation is in the reverse order of removal.
    NOTE
    Do not reuse the adjusting nut, use a new adjusting nut for installation.


    NOTE
    Check the rear wheel alignment and adjust if necessary.

  2.  

 
label.common.footer.alt.autozoneLogo