Maxima 2007

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Engine cover, if equipped
     
    Water drain plug on water pump side of cylinder block
     
    Lower radiator hose
     
    Water inlet and thermostat assembly

    Click image to see an enlarged view

    Fig. View of thermostat and components



    Click image to see an enlarged view

    Fig. View of thermostat and components

     

  6.  

To install:

  1. To install, reverse removal procedure.
  2.  
  3. Install thermostat with jiggle valve facing upward and tighten bolts to 75-99 inch lbs. (8.4-11.2 Nm).
  4.  
  5. Run engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo