Mazda 323/626/929/GLC/MX-6/RX-7 1978-1989

Grille

Print

REMOVAL & INSTALLATION



323
  1. Remove the single screw from the center of the radiator.
  2.  
  3. Open the tabs of the three radiator fasteners using a small flat blade screwdriver and remove the radiator grille.
  4.  
  5. To install, position the grille and align the fastener holes with the holes in the body. Once they are aligned, press the fasteners into place and install the center installation screw.
  6.  

626 and MX-6

See Figure 1

  1. Using the tip of a small flat bladed screwdriver, open the tabs of the fasteners and remove the radiator grille. The number of fasteners will vary depending on the model year.
  2.  
  3. To install, position the grille and align the fastener holes with the holes in the body. Once they are aligned, press the fasteners into place.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Releasing the grille tab fasteners on 626 and MX-6

 
label.common.footer.alt.autozoneLogo