Mazda 323/626/929/GLC/MX-6/RX-7 1978-1989

Instrument Cluster Mounted Switches

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

On late model Mazdas, these switches are mounted in a cluster on either side of the instrument cluster.

  1. Remove the instrument cluster as described earlier in this section.
  2.  
  3. Working from the rear, unfasten the attaching screws at the top and bottom, then remove the switch cluster.
  4.  
  5. Carefully pry the switch knob off the front of the cluster. Release the lockpins at the rear, then pull the switch out the back of the cluster.
  6.  
  7. Install in the reverse order, making sure the plugs are securely connected.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Prying a switch knob off a cluster of switches (common on later models)



Click image to see an enlarged view

Fig. Fig. 2: Release the lockpins and remove the switch from the rear of the cluster

 
label.common.footer.alt.autozoneLogo