Mazda 323/626/929/GLC/MX-6/RX-7 1978-1989

Door Lock Cylinder

Print

REMOVAL & INSTALLATION



  1. Remove the regulator handle, arm rest etc.
  2.  
  3. Remove the trim panel and watershield.
  4.  
  5. Remove the bolts attaching the inner handle and remove the inner handle.
  6.  
  7. Raise the glass fully and disconnect the remote control rod from the lock cylinder.
  8.  
  9. Remove the door lock attaching screw(s) and remove the door lock.
  10.  
  11. Remove the retainer that secures the door lock cylinder to the door inner panel and remove the lock cylinder.
  12.  
  13. Installation is the reverse of the removal procedure.
  14.  

 
label.common.footer.alt.autozoneLogo