Mazda 323/626/929/GLC/MX-6/RX-7 1978-1989

Hatch/Rear Door Lock

Print

REMOVAL & INSTALLATION



  1. Using a flat screwdriver, gently dislodge the trim fasteners and remove the door trim.
  2.  
  3. Disconnect the rod for the push button release.
  4.  
  5. Remove the push button securing clip, then remove the push button.
  6.  
  7. Unfasten the door lock attaching bolts and remove the door lock.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  
  11. Adjust the door as described previously in this section.
  12.  

 
label.common.footer.alt.autozoneLogo