Mazda 323/MX-3/626/MX-6/Millenia/Protégé 1990-1998 and Ford Probe 1993-1997

Fenders

Print

REMOVAL & INSTALLATION



  1. Remove the grille and headlight assemblies.
  2.  
  3. Remove the front corner turn signal assemblies.
  4.  
  5. If attached to the fender, remove the front bumper assembly.
  6.  
  7. Remove the front mud guard and the inner fender plastic liner.
  8.  
  9. Remove the fender mounting bolts and remove the fender assembly.
  10.  
  11. Installation is the reverse of the removal procedure. Tighten the fender mounting bolts to 61-87 inch lbs. (7-10 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo