Mazda 323/MX-3/626/MX-6/Millenia/Protégé 1990-1998 and Ford Probe 1993-1997

Pressure Regulator Control Solenoid Valve

Print

REMOVAL & INSTALLATION



This applies to California emissions equipped vehicles only.

  1. Disconnect the negative battery cable.
  2.  
  3. Detach the vacuum hose and the electrical connector from the pressure regulator control solenoid valve.
  4.  
  5. Disconnect the pressure regulator control solenoid valve from the intake manifold.
  6.  
  7. Installation is the reverse of the removal procedure.
  8.  

 
label.common.footer.alt.autozoneLogo