Mazda 323/MX-3/626/MX-6/Millenia/Protégé 1990-1998 and Ford Probe 1993-1997

Door Locks

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the inner door panel and remove the inner door screening.
  4.  
  5. If the locks are power, disconnect the power lock controller from the lock assembly.
  6.  
  7. Remove the door lock mounting screws and disconnect the linkage. Remove the lock assembly from the door.
  8.  
  9. Installation is the reverse of the removal procedure. Tighten the door lock mounting screw(s) to 37-55 inch lbs. (4.2-6.2 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo