Mazda 323/MX-3/626/MX-6/Millenia/Protégé 1990-1998 and Ford Probe 1993-1997

Electric Window Motor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the door panel and the inner door shielding from the door.
  4.  
  5. Unplug the power window motor electrical connector from inside the door.
  6.  
  7. Prop the window in the up position and remove the window motor mounting bolts from the door. Remove the window motor from the door.
  8.  
  9. Installation is the reverse of the removal procedure. Tighten the motor mounting bolts to 61-87 inch lbs. (6.9-9.8 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo