Mazda B-Series 1998-06

Control Module

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Disconnect the electrical connectors.
  6.  
  7. Raise and support the vehicle.
  8.  
  9. Remove the screws and the control module.
    NOTE
    The 4x2 and 4x4 modules are not interchangeable. Before installing a module, verify its application.

  10.  
  11. To install, reverse the removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo