Mazda B-Series 1998-06

Outside Mirrors

Print

Power Mirrors



Diagnosis & Testing

If the mirrors are inoperative, inspect the following:



Wiring, connectors and circuitry
 
Mirror control switch
 

If a single mirror is inoperative, inspect the following:



Wiring, connectors and circuitry
 
Mirror
 
Mirror control switch
 

If a single mirror does not function with switch logic, inspect the following:



Wiring, connectors and circuitry
 
Mirror control switch
 
Mirror
 

Removal & Installation
Motor
  1. Remove the exterior mirror glass.
  2.  
  3. Remove the 3 screws and position aside the exterior mirror motor.
  4.  
  5. Disconnect the electrical connectors and remove the exterior mirror motor.
  6.  
  7. To install, reverse the removal procedure.
  8.  

Switch
Pickups
  1. Remove the front door trim panel.
  2.  
  3. Remove the outside rear view mirror switch.
  4.  
  5. To install, reverse the removal procedure.
  6.  

Removal & Installation



Navajo, B Series Pick-Up And 1996-98 MPV Models


Click image to see an enlarged view

Fig. Navajo and 1994-97 B Series Pick-up outside rear view mirror

  1. The door panel must first be removed to gain access to the mounting nuts. Disconnect the harness connector if equipped with power mirrors.
  2.  
  3. Remove the mounting fasteners and lift out the mirror. Remove and discard the gasket, if equipped.
  4.  
  5. When installing, make sure the gasket is properly positioned (if equipped) before tightening the screws.
  6.  
  7. If equipped with power mirror, plug in the electrical connector and test the operation of the power mirror before installing the door panel.
  8.  



Click image to see an enlarged view

Fig. To remove the outside mirror, first remove the door trim panel and peel back the padding to access the nuts (arrow)



Click image to see an enlarged view

Fig. With the access holes uncovered, loosen and remove the mirror attaching nuts

 
label.common.footer.alt.autozoneLogo