Mazda B-Series 1998-06

Front Disc Brakes


Click image to see an enlarged view

Fig. Exploded view of the 1994 4WD front disc brake assembly-4-wheel ABS sensor not shown

Click image to see an enlarged view

Fig. View of the 1994 front disc brake components

Click image to see an enlarged view

Fig. Front disc brake assembly component locations

Dust and dirt accumulating on brake parts during normal use may contain asbestos fibers from production or aftermarket brake linings. Breathing excessive concentrations of asbestos fibers can cause serious bodily harm. Exercise care when servicing brake parts. Do not sand or grind brake lining unless equipment used is designed to contain the dust residue. Do not clean brake parts with compressed air or by dry brushing. Cleaning should be done by dampening the brake components with a fine mist of water, then wiping the brake components clean with a dampened cloth. Dispose of cloth and all residue containing asbestos fibers in an impermeable container with the appropriate label. Follow practices prescribed by the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA) for the handling, processing, and disposing of dust or debris that may contain asbestos fibers.