Mazda B-Series 1998-06

Back-Up (Reverse) Light Switch

Print

Removal & Installation



Manual Transmissions


Click image to see an enlarged view

Fig. Location of the back-up lamp switch

  1. Disconnect the negative battery cable.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Place the transmission in any position other than N .
  6.  
  7. Clean the area around the switch, then remove the switch.
  8.  

To install:

  1. Install the switch and tighten 8-12 ft. lbs. (11- 16Nm).
  2.  
  3. Reconnect the harness connector to the switch.
  4.  
  5. Lower the vehicle.
  6.  
  7. Reconnect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo